产品
EKG Leadwire to Pinch or Snap
ECG cables are able to endure twisting and bending and have been tested to ensure optimum performance. The signal integrity of these cables is protected with electrical shielding. optimized. Our selection of ECG patient cable options gives you the supply of cables you need, when you need them
Enamelled Copper Wire – THW
COPPER WIRE TO SUIT A WIDE RANGE OF COIL WINDING APPLICATIONS
THW series
Specifically designed for coil windings that may be subjected to higher voltage spikes, and the wire has exhibited increased resistance to partial discharges and improved abrasion resistance to repeated scrape.
The combination of the modified polyester and polyamide-imide coatings provides an insulation system with outstanding toughness and excellent dielectric properties.
Enamelled Copper Wire – UEW
COPPER WIRE TO SUIT A WIDE RANGE OF COIL WINDING APPLICATIONS
UEW series
Copper wire coated with a very thin layer of insulation. We have different range of enameled copper wires coated with a layer of insulation and come with good mechanical properties such as tensile strength, elongation. The copper is fully annealed to deliver the best performance for applications in electrical motors, transformers, switchgear, consumer and industrial electronics, automotive electronics, refrigerators, air conditioners, household appliances, pumps and fans and more.
Enamelled Copper Wire – UEW-F
COPPER WIRE TO SUIT A WIDE RANGE OF COIL WINDING APPLICATIONS
UEW-F series
Copper wire coated with a very thin layer of insulation. We have different range of enameled copper wires coated with a layer of insulation and come with good mechanical properties such as tensile strength, elongation. The copper is fully annealed to deliver the best performance for applications in electrical motors, transformers, switchgear, consumer and industrial electronics, automotive electronics, refrigerators, air conditioners, household appliances, pumps and fans and more.
Enamelled Copper Wire – UEW-H
COPPER WIRE TO SUIT A WIDE RANGE OF COIL WINDING APPLICATIONS
UEW-H series
Copper wire coated with a very thin layer of insulation. We have different range of enameled copper wires coated with a layer of insulation and come with good mechanical properties such as tensile strength, elongation. The copper is fully annealed to deliver the best performance for applications in electrical motors, transformers, switchgear, consumer and industrial electronics, automotive electronics, refrigerators, air conditioners, household appliances, pumps and fans and more.
Enamelled Copper Wire – UEYE
COPPER WIRE TO SUIT A WIDE RANGE OF COIL WINDING APPLICATIONS
UEYE series
Solderable polyurethane insulated copper wire with nylon overcoat. The nylon overcoat makes the wire smooth enough to be suitable for automatic winding.
Enamelled Copper Wire – UEYE-F
COPPER WIRE TO SUIT A WIDE RANGE OF COIL WINDING APPLICATIONS
UEYE-F series
Solderable polyurethane insulated copper wire with nylon overcoat for use in applications through temperature class F 155°C.
The nylon overcoat makes the wire smooth enough to be suitable for automatic winding.
Enamelled Copper Wire – UEYE-H
COPPER WIRE TO SUIT A WIDE RANGE OF COIL WINDING APPLICATIONS
UEYE-H series
Solderable polyurethane insulated copper wire with nylon overcoat for use in applications through temperature class F 180°C.
The nylon overcoat makes the wire smooth enough to be suitable for automatic winding.
Filament Reinforced
Polyester film/glass filament tape, thermosetting rubber adhesive. Excellent solvent resistance and thermosetting qualities agressive high adhesive, non flagging rubber adhesive.
柔性复合材料
FCM® is an insulating materials NMN obtained by laminating a polyester (Mylar®) film with one sheet or two sheets of Nomex® paper (aromatic/polyamid fibers) based calendared e.g. Nomex® 410, 416 & 464 or un-calendared e.g. Nomex® 411. Our laminating with a thermo-resistant resin ensures the perfect bonding.
Nomex® 410, 416 & 464 with good mechanical resistance and an excellent resistance to the high temperatures; Polyester film is very resistant to the tearing; the combination of the two materials enables FCM® to get high performances when both mechanical or thermal stress occurs, suitable for Slot Liner,Ground Insulation ,Wedges ,Barrier ,Phase Insulation ,Layer and HVT Coils
FCM® is produced in several types and thicknesses; the most important our Nomex® laminates containing total thickness of 6 mils and/or 5 mil of Nomex® type and laminates containing total thickness of 10 mil of Nomex type N411MN are ground and Interwinding Insulation in P.Leo Electrical Insulation System OBJS2, UL File No. E200050 : Class N (200℃) N86 and Class R (220℃)R81, R82 and Class S (240℃) S81, S82 system.
Flexible Silicone Varnish Fiberglass Sleeving
Silicone rubber coated fiberglass sleeving UL File No. E195829
Electrical Insulating Sleeving for :
(1)High & Low Temperature Applications.
(2)High & Low Voltage Applications.
(3)Abrasive & Other Physically Demanding Applications.
(4)Flame Resistance.
(5)UL requirements.
(6)Compatibility with Polyester, Acrylic, Epoxy, Phenolic, Fomvar & Other Wire Enamels.
Fully Insulated Wire – FIW
ZERO-DEFECT ENAMELLED ROUND COPPER WIRE
High thermal class and high voltage resistance
Fully insulated wire (FIW) zero-defect enameled round cooper wire with high thermal class, zero-defect strengthened insulation and high voltage resistance compliance with IEC 60317-56 / IEC 60950 and NEMA MW85-C. The wire can meet the requirements of miniaturized components, good winding performance and low cost, ideal for compact transformers and electronic switches.
